Stages Cycling Power G3 L – Stages Carbon BB30

Stages Cycling Power Meter G3 L – Stages Carbon BB30Ridden by three TDF winners and multiple championship winners to victory, Stages power metres have been proven to be able to perform at the most elite level of the sport. This single-sided power meter provides readings with an accuracy of within +/- 1.5% and fits 30mm SRAM, Race Face Next SL, Easton & FSA 386EVO cranksets by way of appropriate Stages 30mm alloy spindles.Increased AccuracyStages has built on what it learned when producing its Gen 2 model, by developing the technology even further for increased accuracy of the readings. This Gen 3 model is assembled within a  non-drive-side Stages Carbon crank arm and built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. The crank arm is also individually calibrated, which ensures it provides an accuracy that can be trusted by avid amateurs and professionals on the World Tour.Reliable Readings In Any WeatherTo ensure the measurements remain consistent in any weather type, Stages introduced a feature that’s never been seen integrated into a power meter before. The feature is “Active Temperature Compensation” and Stages added this technology to account for any sudden temperature changes that you might encounter on your ride. If temperature changes are not accounted for, it can result in false and inaccurate data.Strong ConnectionOther improvements include more powerful Bluetooth and ANT+ transmitters. These improvements ensure the power meter provides a powerful and stable connection with your cycle computer is maintained. Also, thanks to the addition of a more advanced accelerometer, the power meter has a faster sampling rate for more up-to-date feedback on your performance.Features:  Accelerometer based cadence measurement     Wirelessly upgradable firmware     LED indicator displays battery level     Updated accelerometer and addition of gyroscope     Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength     Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter     Power Range (Watts): 0 to 5000     Cadence range (rpm): 10-220     Water Resistance Rating: IPX7  Weight: Only adds 20g to base crank armCompatibility:     Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold seperately)   Frame Compatibility: Most frames         Device Compatibility: ANT+, Bluetooth Smart ready      Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and othersStages Cycling spindles for 30mm are available in five options to purchase seperately:  For SRAM Red 22 BB30  For SRAM Force 22, Rival 22, Force/Rival CX1  For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer  For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacerRace Face Next SLIn The Box:     Power meter     High-quality CR2032 coin cell battery     Product identification card with serial number and ANT+ I.D.     Number user guideBuy Stages Cycling Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.